No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-HT15D3 Outdoor Power System User Manual (Russia, Megafon)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing an AC SPD Module

Replacing an AC SPD Module

Prerequisites

  • An ESD wrist strap, ESD gloves, ESD box or bag, and cabinet door key are available.

  • The new AC SPD module is intact and has the same specifications as the AC SPD module to be replaced.

Do not replace an AC SPD module during a thunderstorm.

Procedure

  1. Connect the ground cable of the ESD wrist strap, and wear the ESD wrist strap and ESD gloves.
  2. Press the top and bottom of the faulty AC SPD module and pull it out, as shown in Figure 4-3.
  3. Install the new AC SPD module, as shown in Figure 4-3.

    Figure 4-3  Replacing an AC SPD module

  4. Disconnect the ground cable of the ESD wrist strap, and remove the ESD wrist strap and ESD gloves.

Follow-up Procedure

Check that the alarm for the AC SPD is cleared.
Download
Updated: 2019-03-05

Document ID: EDOC1000078967

Views: 7723

Downloads: 185

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next