No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-HT15D3 Outdoor Power System User Manual (Russia, Megafon)

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configurations

Configurations

Table 2-1 describes the TP48200A-HT15D3 configurations.

Table 2-1  Configurations

Item

Configuration

Application environment

Class C

Heater

HAU03A-01

Rectifier

A maximum of four R4850G2s or R4850N2s

Maximum output current

200 A

Temperature control capacity

Equipment compartment: heat exchanger ≥ 85 W/k

Battery compartment: TEC (200 W cooling capacity and 400 W heating capacity), 500 W heater

Heat dissipation

  • Equipment compartment: heat exchanger
  • Battery compartment: TEC

SMU

SMU02B

UIM

UIM02C

Sensors

  • Mandatory: battery temperature sensor, door status sensor, smoke sensor, and equipment compartment temperature sensor
  • Optional: temperature and humidity sensor and water sensor

Lamp

Mandatory

Battery

One string of 12 V, 150 Ah batteries

NOTE:
  • Class A environments refer to indoor environments where temperature and humidity is controllable, including rooms where human beings live.
  • Class B environments refer to indoor environments in which the ambient temperature and humidity are not controlled and outdoor environments (with simple shielding measures) where humidity can reach 100%.
  • Class C environments refer to sea environments or outdoor land environments (with simple shielding measures) near pollution sources. If a site is near a pollution source, it is at most 3.7 km away from salt water, such as the sea and salt lakes, 3 km away from heavy pollution sources, such as smelteries, coal mines, and thermal power plants, 2 km away from medium pollution sources, such as chemical, rubber, and galvanization industries, and 1 km away from light pollution sources, such as packing houses, tanneries, and boiler rooms.
  • Class D environments refer to areas about 500 m away from the seashore. Class D environments are special Class C environments.
Download
Updated: 2019-03-05

Document ID: EDOC1000078967

Views: 7470

Downloads: 183

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next