No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-HT15D3 Outdoor Power System User Manual (Russia, Megafon)

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cable Layout

Cable Layout

  • When routing cables, ensure that a sufficient distance exists between the cables and the DC busbar, shunt, and fuse. This prevents damage to the insulation layer of the cables.
  • Route and bind signal cables and power cables separately.
  • Ensure that cables meet the VW-1 testing requirements.
  • Do not route cables behind the air exhaust vents of rectifiers in the cabinet.
  • Ensure that all cables are securely bound.
Download
Updated: 2019-03-05

Document ID: EDOC1000078967

Views: 7321

Downloads: 183

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next