No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-HT19C4-1, TBC300A-TCA2 Outdoor Power System User Manual

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


Table 2-1 describes the system configurations for the TP48200A-HT19C4-1 and TBC300A-TCA2.

Table 2-1  Configurations




Application environment

Class C

Temperature control unit (TCU)

  • Equipment compartment: HXC150S heat exchanger
  • Battery compartment: TEC

Battery compartment: TEC

Space for customer equipment

16 U


AC input system

110 V AC dual-live wire


AC input circuit breaker

One 2-pole 100 A circuit breaker


(Optional) AC output circuit breaker

One 2-pole 10 A circuit breaker and one 3-pole maintenance socket protected by an 10 A electric residual current device (RCD).


DC output

  • Battery low voltage disconnection (BLVD): two 1-pole 10 A circuit breakers and four 1-pole 16 A circuit breakers
  • Load low voltage disconnection (LLVD): one 1-pole 100 A circuit breaker, one 1-pole 63 A circuit breaker, and four 1-pole 32 A circuit breakers
  • Battery route: two 1-pole 125 A circuit breakers



A maximum of four R4850G2s or R4830G2s can be configured.


Site monitoring unit (SMU)

One SMU02B


User interface module (UIM)

One UIM02C



  • Mandatory: one battery temperature sensor, one ambient temperature sensor in the equipment compartment, and one door status sensor
  • Optional: one smoke sensor, one ambient temperature and humidity sensor, and one water sensor.

One door status sensor and one battery temperature sensor.


The battery compartment with two layers supports a maximum of two 12 V, 150 Ah battery strings.

Battery compartment of two layers: two front-access battery strings (12 V/100 Ah) can be configured.

Maximum output power

12 kW

Class C environments refer to sea environments or outdoor land environments (with simple shielding measures) near pollution sources. If a site is near a pollution source, it is at most 3.7 km away from salt water, such as the sea and salt lakes, 3 km away from heavy pollution sources, such as smelteries, coal mines, and thermal power plants, 2 km away from medium pollution sources, such as chemical, rubber, and galvanization industries, and 1 km away from light pollution sources, such as packing houses, tanneries, and boiler rooms.
Updated: 2019-03-05

Document ID: EDOC1000078969

Views: 6542

Downloads: 209

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next