No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-HT19C4-1, TBC300A-TCA2 Outdoor Power System User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DC SPD Fault

DC SPD Fault

Possible Causes

  • The DC SPD detection cable is disconnected.
  • The DC SPD is faulty.


  1. Check whether the DC SPD detection cable is disconnected. If so, reconnect the cable.
  2. If the DC SPD detection cable is reliably connected, replace the DC SPD.
Updated: 2019-03-05

Document ID: EDOC1000078969

Views: 7324

Downloads: 218

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next