No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-HT19C4-1, TBC300A-TCA2 Outdoor Power System User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Laying Out Cables

Laying Out Cables

When the temperature is very low, violent strike or vibration may damage the cable sheathing. To ensure safety, comply with the following requirements:
  • Cables can be laid or installed only when the temperature is higher than 0°C.
  • Before laying out cables which have been stored in a temperature lower than 0°C, move the cables to an environment of the ambient temperature and store them at the ambient temperature for at least 24 hours.
  • Handle cables with caution, especially at a low temperature. Do not drop the cables directly from the vehicle.
Updated: 2019-03-05

Document ID: EDOC1000078969

Views: 6645

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next