No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-HT19C4-1, TBC300A-TCA2 Outdoor Power System User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rect Comm Fault

Rect Comm Fault

Possible Causes

  • A rectifier has been removed.
  • Rectifier connections are loose.
  • A rectifier is faulty.


  1. Check whether a rectifier has been removed. If so, reinstall it.
  2. If the rectifier is in position, remove the rectifier and reinstall it.
  3. If the alarm persists, replace the rectifier.
Updated: 2019-03-05

Document ID: EDOC1000078969

Views: 6608

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next