No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-HT19C4-1, TBC300A-TCA2 Outdoor Power System User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AC Failure

AC Failure

Possible Causes

  • The AC input power cable is faulty.
  • The AC input circuit breaker is OFF.
  • The power grid is faulty.


  1. Check whether the AC input cable is loose. If so, secure the AC input cable.
  2. Check whether the AC input circuit breaker is OFF. If so, handle the fault which caused the AC input circuit breaker to turn OFF and then switch on the circuit breaker.
  3. Check whether the AC input voltage is lower than 50 V AC. If so, handle the power grid fault.
Updated: 2019-03-05

Document ID: EDOC1000078969

Views: 6703

Downloads: 211

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next