No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Does the SSID of an AP Disappear Intermittently on a STA When the AP Is Running Normally?

Why Does the SSID of an AP Disappear Intermittently on a STA When the AP Is Running Normally?

Possible causes are:

  • Automatic channel adjustment is enabled on the AP, so the AP continuously adjust channels to obtain the best radio performance. The radio module of the AP is reset when the channel is changed. You can run the channel-mode fixed command in the radio profile view to solve this problem.

  • The STA is far from the AP or is blocked by an obstacle. As a result, the receive signal strength on the STA is weak.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 454660

Downloads: 4318

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next