No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
When router Functions as a DHCP Server, Can the DHCP Server Select an Address Pool Based on the Secondary IP Address?

When router Functions as a DHCP Server, Can the DHCP Server Select an Address Pool Based on the Secondary IP Address?

In V200R006C10 and later versions, the DHCP server can select an address pool based on the secondary IP address.

Limitations:

  • Only global address pools support secondary IP address-based address pool selection and interface address pools do not support this function.
  • The DHCP server and client must be on the same network segment, and the DHCP relay agent cannot be configured.

Allocation Mechanism:

  1. The DHCP server preferentially selects the IP addresses that are statically bound using the static-bind command in the global address pool view.
  2. The DHCP server first searches for a valid IP address from the address pool corresponding to the primary IP address. If no address is available in this address pool, the DHCP server then searches for a valid IP address from the address pool corresponding to the secondary IP address.

Configuration Example:

#
ip pool 200
 gateway-list 10.200.1.1
 network 10.200.1.0 mask 255.255.255.0
 dns-list 10.114.114.114
#
ip pool 201
 gateway-list 10.201.1.1
 network 10.201.1.0 mask 255.255.255.0
 dns-list 10.114.114.114
#
interface Vlanif200
 ip address 10.200.1.1 255.255.255.0
 ip address 10.201.1.1 255.255.255.0 sub
 dhcp select global
#
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000079719

Views: 496010

Downloads: 4534

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next