No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring the Default Settings Using the Configuration File

Restoring the Default Settings Using the Configuration File

When the device is powered on, it reads the configuration file from the default directory for initialization. Therefore, the configuration in the file is called the initial configuration. If no configuration file is stored in the default directory, the device uses the default parameters for initialization. You must restart the device to make the recovered default settings take effect.

  • Restore the configuration file using the FTP/TFTP server.

    For detailed operations, see Using FTP/TFTP to Transfer Files. Download the default configuration file to the device.

  • Run the startup saved-configuration command to specify the default configuration file for the next startup and restore the default settings.

    <Huawei> startup saved-configuration
    <Huawei> reboot fast
Updated: 2019-08-09

Document ID: EDOC1000079719

Views: 489959

Downloads: 4503

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next