No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why IP-based CAR Is Invalid on a WAN-side Interface?

Why IP-based CAR Is Invalid on a WAN-side Interface?

Because NAT is configured on the WAN-side interface, the device cannot differentiate private IP addresses.

In V200R002C00 and later versions, to configure IP-based CAR on a WAN-side interface, create a VLANIF interface and configure IP-based CAR on the VLANIF interface.
  • To limit the download rate, configure IP-based CAR for a specified destination address in the outbound direction.
  • To limit the upload rate, configure IP-based CAR for a specified source address in the inbound direction.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 455091

Downloads: 4318

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next