No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changes of Local Port Mirroring Commands

Changes of Local Port Mirroring Commands

Starting from V200R002C00, observe-port-index is deleted from observe-port [ observe-port-index ] interface interface-type interface-number and port-mirroring to observe-port observe-port-index { both | inbound | outbound }.

V200R001

Command used to configure an observing interface: observe-port [ observe-port-index ] interface interface-type interface-number

Command used to configure a mirrored interface: port-mirroring to observe-port observe-port-index { both | inbound | outbound }

To configure local port mirroring, perform the following operations:
  1. Run the system-view command to enter the system view.
  2. Run the observe-port [ observe-port-index ] interface interface-type interface-number command to configure a local observing interface.
  3. Run the interface interface-type interface-number command to enter the view of a specified interface.
  4. Run the port-mirroring to observe-port observe-port-index { both | inbound | outbound } command to configure a local mirrored interface.

V200R002 and Later Versions

Command used to configure an observing interface: observe-port interface interface-type interface-number

Command used to configure a mirrored interface: mirror to observe-port { both | inbound | outbound }

To configure local port mirroring, perform the following operations:
  1. Run the system-view command to enter the system view.
  2. Run the observe-port interface interface-type interface-number command to configure a local observing interface.
  3. Run the interface interface-type interface-number command to enter the view of a specified interface.
  4. Run the mirror to observe-port { both | inbound | outbound } command to configure a local mirrored interface.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 452248

Downloads: 4311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next