No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
When You Configure the set priority dscp and remark dscp Commands Simultaneously, Which One Takes Effect?

When You Configure the set priority dscp and remark dscp Commands Simultaneously, Which One Takes Effect?

The set priority dscp command sets the DSCP priority of protocol packets sent by the device. To change the DSCP priority of protocol packets, you can also configure a traffic policy, define remark dscp for protocol packets in the traffic policy, and apply the traffic policy to the outbound direction of an interface.

If the ip soft-forward enhance enable command has been executed to enable the enhanced IP forwarding function, the remark dscp command takes effect. If the ip soft-forward enhance enable command is not used, the set priority command takes effect.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 456648

Downloads: 4321

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next