No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Change the License?

How Do I Change the License?

When you adjust the license between devices or want to change the license when the original license is incompatible on the upgraded device, run the license revoke command to revoke the existing license. The system then returns a license revocation code. You can use the license revocation code to apply for a new license file, and activate the new license file to the device during the trial period.

Running the license revoke command causes the license file to be in trial state. The trial period is 60 days. If the trial period is reached, services will be interrupted. Exercise caution when you run the license revoke command.
  1. Before running the license revoke command, perform the following operations:
    • Contact agents and determine whether the license can be replaced. Check the time the license file can be obtained.
    • Contact Huawei technical support personnel.
  2. If the license needs to be changed, run the license revoke command to obtain the license revocation code and provide it for agents or technical support personnel.

    You can use the following methods to obtain the license revocation code:
    • Run the license revoke command. Then obtain the license revocation code in the displayed message:

      <Huawei> license revoke
      Warning: This operation will cause LCS into the TRIAL state. Continue? [Y/N]:y     
      Info: License revoke success. The revoke ticket is: LIC2011021100B400:C20824861A2C0C03B9803D05FC40783D36B76301.
      
    • After the license is revoked, run the display license revoke-ticket command to view the license revocation code.

      <Huawei> display license revoke-ticket                           
      Info: The revoke ticket is: LIC2011021100B400:C20824861A2C0C03B9803D05FC40783D36B76301
      
  3. After obtaining the new license file, store the license file in the root directory of the flash memory on the device through FTP. Run the license active file-name command to activate the license.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 451667

Downloads: 4311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next