No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Do E1 and SA Cards Support Inter-Board MP?

Do E1 and SA Cards Support Inter-Board MP?

In V200R005 and earlier versions:

The device does not support inter-board MP.

In V200R006 and later versions:

The device supports inter-board MP only on interface cards of the same type. The 1STM1, 1STM4, 4STM1, 1CPOS-155M, and 1CPOS-155M-W interface cards do not support inter-board MP.

The 1SA/2SA/8SA, 1E1/T1-M, 2E1/T1-M, 4E1/T1-M, 8E1/T1-M, 1E3/CE3/T3/CT3, 1E1/T1-F, 2E1/T1-F, 4E1/T1-F, 8E1/T1-F, and 1BST interface cards support inter-board MP.

Updated: 2019-08-09

Document ID: EDOC1000079719

Views: 495095

Downloads: 4530

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next