No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Are RSVP-TE Path Messages Forwarded on the MPLS Network?

How Are RSVP-TE Path Messages Forwarded on the MPLS Network?

Generally, RSVP-TE Path messages are forwarded on the MPLS network using IP routes. In the scenario where the primary CR-LSP is faulty (that is, the primary CR-LSP is in FRR in-use state) and the TE FRR bypass tunnel is used, RSVP-TE Path messages are forwarded over the TE tunnel.

Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 449135

Downloads: 4305

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next