No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Enable Packets with a Specific DSCP to Enter High-Priority Queues?

How Do I Enable Packets with a Specific DSCP to Enter High-Priority Queues?

Use traffic classifiers to enable packets with high differentiated services code point (DSCP) values to enter expedited forwarding (EF) queues, and to ensure that the packets are transmitted preferentially. For example, to enable packets with a DSCP of 22 to enter EF queues, configure the following:

<Huawei> system-view
[Huawei] traffic classifier c1
[Huawei-classifier-c1] if-match dscp 22
[Huawei-classifier-c1] quit
[Huawei] traffic behavior b1
[Huawei-behavior-b1] queue ef bandwidth 100 cbs 2500
[Huawei-behavior-b1] quit
[Huawei] traffic policy p1
[Huawei-trafficpolicy-p1] classifier c1 behavior b1
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 444509

Downloads: 4295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next