No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Which Voice Service Modes Do AR Series Routers Support?

Which Voice Service Modes Do AR Series Routers Support?

Currently, AR series routers support the following two voice service modes: Session Initiation Protocol access gateway (SIP AG) ,H.248 access gateway (H248AG) and private branch exchange (PBX). You can run the display voice service-mode command to view the voice service modes of the current AR.

To switch between modes, run the service-mode { sipag | h248ag | pbx } command in the voice view.

NOTE:

Before switching voice modes, delete all configuration data in current mode. Change and save the new configuration, and reboot the device to enable the new mode.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 448009

Downloads: 4305

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next