No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Are All the Next Hop Addresses in the BGP Routing Table Displayed as 0.0.0.0 After BGP Imports Routes from Other Protocols?

Why Are All the Next Hop Addresses in the BGP Routing Table Displayed as 0.0.0.0 After BGP Imports Routes from Other Protocols?

Only routes that exist in the Border Gateway Protocol (BGP) routing table can be imported by the BGP. When importing such routes, BGP does not add new routes, but increases the reference count based on the routing table.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000079719

Views: 496018

Downloads: 4534

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next