No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Function of Interface Priorities?

What Is the Function of Interface Priorities?

The port priority command sets the interface priorities, that is, specifies the default priorities of incoming packets on the interface. AR series routers send packets to different queues based on the interface priority. By default, the AR interface does not trust packet priorities. Packets enter queues according to the interface priority.

If all packets enter queues according to the interface priority, all packets on an interface enter the same queue. Differentiated services cannot be provided. Using the trust command, you can specify the priority to be mapped for packets, that is, search for a priority mapping to the packet priority in the priority mapping table.
  • The AR100&AR120&AR150&AR160&AR200 series and AR1200 series send packets to different interface queues based on the mapped 802.1p priorities, and use the queue scheduling to provide services for packets with different priorities.
  • On AR2200 series:
    • From V200R001C00, the device sends packets to different interface queues based on the mapped 802.1p priorities, and uses the queue scheduling to provide services for packets with different priorities.
    • From V200R003C00, the AR2204 or AR2220E sends packets to different interface queues based on the mapped 802.1p priorities, and uses the queue scheduling to provide services for packets with different priorities. While the AR2201, AR2202, AR2220, AR2240C and AR2240 send packets to different interface queues based on the mapped local priorities, and use the queue scheduling to provide services for packets with different priorities.
  • The AR3200&AR3600 series send packets to different interface queues based on the mapped local priorities, and use the queue scheduling to provide services for packets with different priorities.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 448299

Downloads: 4305

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next