No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I View the Usage of the DSP Resources?

How Can I View the Usage of the DSP Resources?

  • V200R002C00 and earlier versions

    Run the display voice dsp-dimm stateslot/dsp-index  |  channel  slot/dsp-index/channel   }  command. The idle item in the command output shows the remaining DSP resources. For example:
    <Huawei> display voice dsp-dimm state 15/0 Symbol: 0-idle $-G.711 busy A-All busy W-Wastage X-fault @-IP loopback *-PCM loopback #-prohibited Channel NO.  DSP channel state ---------------------------------------------------------------------- 
    
      0000-0049  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 
    
      0050-0099  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 
    
      0100-0149  00000 00000 00000 00000 00000 000                           
    
      Total:                                                                 
    
          128 DSP channel                                                    
    
          128 idle, 0 G.711 Busy, 0 All Busy, 0 Wastage, 0 Fault,            
    
          0   IP loopback, 0 PCM loopback, 0 prohibited
    
    In the preceding information, 128 idle indicates that 128 DSP channels are idle and the current DSP resources are sufficient.
  • Later versions than V200R002C00

    Run the display voice dsp stateslot/dsp-index  |  channel  slot/dsp-index/channel   }  command. The idle item in the command output shows the remaining DSP resources. For example:
    <Huawei> display voice dsp state 15/0 Symbol: 0-idle $-G.711 busy A-All busy W-Wastage X-fault @-IP loopback *-PCM loopback #-prohibited Channel NO.  DSP channel state ---------------------------------------------------------------------- 
    
      0000-0049  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 
    
      0050-0099  00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 
    
      0100-0149  00000 00000 00000 00000 00000 000                           
    
      Total:                                                                 
    
          128 DSP channel                                                    
    
          128 idle, 0 G.711 Busy, 0 All Busy, 0 Wastage, 0 Fault,            
    
          0   IP loopback, 0 PCM loopback, 0 prohibited
    
    In the preceding information, 128 idle indicates that 128 DSP channels are idle and the current DSP resources are sufficient.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 454750

Downloads: 4318

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next