No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Change the Mode of a Combo Interface?

How Do I Change the Mode of a Combo Interface?

Procedure

Run the combo-port { auto | copper | fiber } command on a combo interface to change its mode. The parameter meanings are as follows:
  • auto: The combo interface automatically selects its mode.
  • copper: The combo interface is forcibly configured to work in electrical interface mode.
  • fiber: The combo interface is forcibly configured to work in optical interface mode.

For example, configure GE1/0/0 to work in optical interface mode.

<Huawei> system-view
[Huawei] interface gigabitethernet 1/0/0
[Huawei-GigabitEthernet1/0/0] combo-port fiber

More Information

In V200R008C30 and earlier versions, a combo interface works in electrical interface mode by default.

In V200R008C50 and later versions, a combo interface works in auto mode by default. When a combo interface works in auto mode, the router detects the interface status.
  • If the electrical interface goes Up first, the combo interface selects the electrical interface mode.

  • If the optical interface goes Up first, the combo interface selects the optical interface mode.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 455219

Downloads: 4320

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next