No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Should I Do If the Hookflash Operation Fails?

What Should I Do If the Hookflash Operation Fails?

  • If a call is released immediately after the hookflash operation, the upper limit of the hookflash detection duration is so small that the hookflash event is converted into a release event. You can increase the flash-hook upper value to increase the hookflash detection duration range.
    [Huawei-voice]flash-hook upper 1000
    [Huawei-voice]
  • If the hookflash operation does not take effect, the lower limit of the hookflash detection duration is so large that the hookflash event of the phone cannot be detected. You can decrease the flash-hook lower value to increase the hookflash detection duration range.
    [Huawei-voice]flash-hook lower 70
    [Huawei-voice]
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 443803

Downloads: 4295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next