No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Does the NAT Function Fail to Be Configured on a High-End LAN Card?

Why Does the NAT Function Fail to Be Configured on a High-End LAN Card?

ACL-based traffic policies cannot be configured on high-end LAN cards (8FE1GE and 24GE cards). Therefore, when the nat outbound command is run to configure outbound NAT with an address pool, the configuration fails.

You can run the set workmode lan-card l3centralize command to disable the routing and forwarding function on a high-end LAN card. You can divert the packets received on the high-end LAN card to the sub-core CPU for packet forwarding. ACL-based traffic policies and the NAT function then can be configured on the high-end LAN card.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 453236

Downloads: 4311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next