No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
I Cannot Log In to the AR Router. How Is this Problem Solved?

I Cannot Log In to the AR Router. How Is this Problem Solved?

  • By default, a user cannot log in to the AR router. You need to run the authentication-mode command in the VTY view to set the authentication mode.

  • To obtain more operation rights, run the user privilege level command in the VTY view to set the user level.

  • To enable the system to disconnect a user from the VTY interface when the timeout period expires, run the idle-timeout command in the VTY view to set the timeout period.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 450732

Downloads: 4309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next