No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure the Web User Level?

How Do I Configure the Web User Level?

Run the local-user user-name privilege level level command in the AAA view to set the web user level.

  • If the user level is 1, the user is a common administrator and can only access Device Information and change the password in User Management.
  • If the user level is 2, the user is an enterprise administrator and has most operating rights in the web system.
  • If the user level is 3 to 15, the user is a super administrator and has all operating rights in the web system.
You are advised to set level to 3 or higher.
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 447966

Downloads: 4305

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next