No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The AR Connects to the TDM PBX VE1. Is the CT License Required?

The AR Connects to the TDM PBX VE1. Is the CT License Required?

The CT license is used to implement call transfer over a trunk. That is, calls received over one trunk are forwarded over another trunk. The AR connects to the TDM PBX VE1 as follows:
  • When the AR working in PBX mode connects to the TDM PBX VE1, users connected to the TDM PBX communicate with only local users. After the value-added service package for voice services is configured, you need to configure CM&BEST License. The CT license is not required.
  • When the AR working in PBX mode connects to the TDM PBX VE1, users connected to the TDM PBX communicate with external users through the AR. After the value-added service package for voice services is configured, you need to configure CT License.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 446821

Downloads: 4301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next