No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Change the Voice Vlan Priority on the AR?

How Can I Change the Voice Vlan Priority on the AR?

The voice VLAN priorities of low-end and high-end ARs are configured in the following methods:
  • High-end ARs (such as the AR2200&AR3200&AR3600, AR2200-S&AR3200-S) whose chips support ACL: After an interface is added to the voice VLAN, the ACL sets the priority of a packet to 6 by default, or you can run the voice-vlan remark { 8021p 8021p-value| dscp dscp-value }* command to change the priority.
  • Low-end ARs (such as the AR100&AR120&AR150&AR160&AR200, AR1200, AR160-S, AR200-S and AR1200-S) whose chips do not support ACL: You can change the VLAN priority only by running the vlan vlan-id priority new-priority-value command.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 456561

Downloads: 4321

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next