No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set the Rate Limit Based on the Website Address

How Do I Set the Rate Limit Based on the Website Address

Assume that the AR router connects to users on private network segments of 192.168.0.2 and 192.168.0.100 and the rate limit needs to be set to 2 Mbit/s for each address in both inbound and outbound directions. Perform the following configurations:

Enter the view of the public network interface.

[Huawei] interface GigabitEthernet 0/0/0

Set the rate limit to 2 Mbit/s in the outbound direction so that traffic from the internal network to the public network is within 2 Mbit/s.

[Huawei-GigabitEthernet0/0/0] qos car outbound source-ip-address range 192.168.0.2 to 192.168.0.100 per-address cir 2000    //*If the rate limit needs to be set for each address, specifyper-address. If the rate limit is set for all addresses, you do not need to specifyper-address.*//

Set the rate limit to 2 Mbit/s in the inbound direction so that traffic from the public network to the internal network is within 2 Mbit/s.

[Huawei-GigabitEthernet0/0/0] qos car inbound destination-ip-address range 192.168.0.2 to 192.168.0.100 per-address cir 2000
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 443889

Downloads: 4295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next