No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Are the Power and Detection Voltage of an RPS?

What Are the Power and Detection Voltage of an RPS?

The output power of an RPS is 150 W.

The output voltage of an RPS is 12 V. When the RPS connected to an AR router detects that the output voltage of the SRU's 12 V power supply is lower than 11.4 V, the RPS triggers the voltage comparator and starts to supply power to the AR router.

Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 447723

Downloads: 4305

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next