No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Voice and Video Services Are Unsmoothly Transmitted When MP Services Are Deployed. How Is This Problem Solved?

Voice and Video Services Are Unsmoothly Transmitted When MP Services Are Deployed. How Is This Problem Solved?

When MP services are deployed, QoS LLQ queues are often used in the uplink and special flows enter LLQ queues. Low delay and packet loss ratio are ensured for LLQ queues.

To ensure that voice and video services are rapidly and smoothly transmitted, enable LFI on the MP-group interface.

Run the ppp mp lfi command in the MP-group interface view.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 446317

Downloads: 4301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next