No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Is the Actual Suppression Value Different from the Configured Traffic Suppression Value?

Why Is the Actual Suppression Value Different from the Configured Traffic Suppression Value?

The traffic suppression supported by AR series routers is a type of granularity-based suppression.

  • The AR1200 series and AR1200-S series use the committed information rate (CIR) mode.

    • If the traffic suppression value is between 64 kbit/s and 1000 kbit/s, the granularity is 64 kbit/s. For example, if the traffic suppression value is set to 65 kbit/s, the effective traffic suppression value is 64 kbit/s. If the traffic suppression value is set to 200 kbit/s, the effective traffic suppression value is 128 kbit/s, and so on.
    • If the traffic suppression value is between 1000 kbit/s and 100,000 kbit/s, the granularity is 1000 kbit/s. For example, if the traffic suppression value is set to 1001 kbit/s, the effective traffic suppression value is 1000 kbit/s. If the traffic suppression value is set to 2999 kbit/s, the effective traffic suppression value is 2000 kbit/s, and so on.
  • The AR2200, AR3600, and AR3200 series use the packet mode. The granularity is 125 packets per second (pps). If the traffic suppression value is set to 10 pps, the effective traffic suppression value is 0 pps. If the traffic suppression value is set to 126 pps, the effective traffic suppression value is 125 pps, and so on.
  • The AR2200-S series and AR3260-S use the packet mode. The granularity is 125 packets per second (pps). If the traffic suppression value is set to 10 pps, the effective traffic suppression value is 0 pps. If the traffic suppression value is set to 126 pps, the effective traffic suppression value is 125 pps, and so on.

Therefore, if the traffic suppression value is not set to a multiple of the granularity, the actual suppression value is different from the traffic suppression value that is set. Within a specified granularity range, all suppression values are correct.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 450768

Downloads: 4309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next