No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The AR Connects to IP Phones and AT0 Trunk Is Used. Do Value-added Service Packages for Voice Services Need to Be Configured?

The AR Connects to IP Phones and AT0 Trunk Is Used. Do Value-added Service Packages for Voice Services Need to Be Configured?

To connect to the PSTN through the AT0 trunk corresponding to the FXO port, the device must be configured to work in PBX mode. After configuring the VAS package for the voice service, you need to configure the CT License. As the IP phone is connected, the router functions as the SIP server. In this case, you need to configure the CM&BEST license.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 452150

Downloads: 4311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next