No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Secure CRT Can Be Used to Log In to the Device Through a Console Interface. The Command Line Interface Can Be Displayed, but a Command Cannot Be Entered. Why?

Secure CRT Can Be Used to Log In to the Device Through a Console Interface. The Command Line Interface Can Be Displayed, but a Command Cannot Be Entered. Why?

When Secure CRT is used to log in to the device through a Console interface and RTS/CTS is selected, the command line interface can be displayed, but a command cannot be entered. Check whether settings of the terminal communication parameters are consistent with those of the physical attribute parameters on the user interface of the console port. By default, flow control parameters are not set on the console interface. Adjust the RTS/CTS configuration as follows:

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 448689

Downloads: 4305

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next