No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What If I Forget the Password for Telnet Login?

What If I Forget the Password for Telnet Login?

If you forget the Telnet login password, log in to the device through the console port and set a new password for Telnet login.

# Take password authentication for VTY0 login as an example. Set the password to Huawei@123.

<Huawei> system-view
[Huawei] user-interface vty 0
[Huawei-ui-vty0] authentication-mode password
[Huawei-ui-vty0] set authentication password cipher
Warning: The "password" authentication mode is not secure, and it is strongly re
commended to use "aaa" authentication mode.
Enter Password(<8-128>):
Confirm password: 
[Huawei-ui-vty0] user privilege level 15
[Huawei-ui-vty0] return
<Huawei> save

# Take AAA authentication for VTY0 login as an example. Set the user name and password to admin123 and Huawei@123, respectively.

<Huawei> system-view
[Huawei] user-interface vty 0
[Huawei-ui-vty0] protocol inbound telnet
[Huawei-ui-vty0] authentication-mode aaa
[Huawei-ui-vty0] quit
[Huawei] aaa
[Huawei-aaa] local-user admin123 password irreversible-cipher Huawei@123
[Huawei-aaa] local-user admin123 service-type telnet
[Huawei-aaa] local-user admin123 privilege level 15
[Huawei-aaa] return
<Huawei> save
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 456710

Downloads: 4321

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next