No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The Client and Server Are Disconnected Every 24 Hours

The Client and Server Are Disconnected Every 24 Hours

When a client uses an internal IP address to access a public network server, only the NAT outbound function is configured. On an 8FE1GE card, a given process refreshes FIB entries every 24 hours to delete NAT sessions. As a result, the client and server are disconnected. To solve this problem, run the fib regularly-refresh disable command to disable the function of refreshing the FIB table every 24 hours.

Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 452747

Downloads: 4311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next