No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Do Parameters of the qos car Command Indicate?

What Do Parameters of the qos car Command Indicate?

The qos car command configures traffic policing on an interface.

  • CIR: Indicates the average rate at which an interface allows traffic to pass through, in kbit/s.
  • PIR: Indicates the maximum rate at which an interface allows traffic to pass through, in kbit/s.
  • CBS: Indicates the average volume of burst traffic allowed by an interface each time, in bytes.
  • PBS: Indicates the maximum volume of burst traffic allowed by an interface each time, in bytes.
By default:
  • If the PIR is set and the PIR and CIR are different, the CBS is 125 times the CIR, the PBS is 125 times the PIR.
  • If the PIR is not set or the PIR and CIR are the same, the CBS is 188 times the CIR, the PBS is 313 times the CIR.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000079719

Views: 494878

Downloads: 4528

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next