No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the SIP AT0 Trunk?

What Is the SIP AT0 Trunk?

The local device uses SIP to connect to the peer device through the SIP AT0 trunk over the IP network.

PBX users can use SIP AT0 trunks to perform SIP calls or other applications through the IMS or softswitch. One SIP AT0 trunk can be used by only one user at a time. Incoming calls over the SIP AT0 trunk are forwarded to the local device or switchboard by default.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 446592

Downloads: 4301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next