No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Traffic Forwarding Fails if the NAT or QoS Configuration on a Physical Interface Is Modified After Dialup Succeeds?

Why Traffic Forwarding Fails if the NAT or QoS Configuration on a Physical Interface Is Modified After Dialup Succeeds?

This problem occurs in the following situations:
  • In RS-DCC, the dialer_bundle-member command is used to specify a dialer bundle for the physical interface.
  • In C-DCC, the dialer circular-group command is used to specify a dialer circular group for the physical interface.
To resume traffic forwarding, terminate the dialup connection and redial to establish a link. After dialup succeeds, do not modify the NAT or QoS configuration on the physical interface.
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 444708

Downloads: 4299

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next