No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A Device Cannot Access the Telnet Port of the Public Interface

A Device Cannot Access the Telnet Port of the Public Interface

NAT server is configured on the public interface.
[Huawei-GigabitEthernet1/0/0] nat server protocol tcp global 10.10.10.1 telnet inside 192.168.2.10 telnet

When a network device attempts to access the Telnet port of the public interface, the device accesses the Telnet port on the internal network that is mapped by the NAT server, and cannot access the Telnet port of the public interface. You can change the Telnet port of the public interface in the NAT server configuration, for example, change the Telnet port to port 1001.

[Huawei-GigabitEthernet1/0/0] nat server protocol tcp global 10.10.10.1 1001 inside 192.168.2.10 telnet
Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 451005

Downloads: 4309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next