No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Import Routes into OSPF

How to Import Routes into OSPF


Figure 29-25  Importing routes into OSPF

Configure OSPF to import Type 1 routes with route tag 33 and cost value 50 of IS-IS process 40.

<Huawei> system-view
[Huawei] sysname RouterB
[RouterB] ospf 100
[RouterB-ospf-100] import-route isis 40 type 1 tag 33 cost 50

More Information

Importing the routes discovered by other routing protocols into OSPF can enrich OSPF routing information. During route importing, you can run the import-route command to set default parameter values (including the route metric, tag, and type) for these external routes. By default, the metric, type, and tag of the external routes imported into OSPF are 1, Type 2, and 1 respectively.

Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 446277

Downloads: 4299

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next