No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Restore Configurations of a Device to Initial Configurations?

How Can I Restore Configurations of a Device to Initial Configurations?

Procedure

  1. Run the reset saved-configuration command to delete the content of the configuration files for next startup and cancel the configuration files for next startup so that the default router settings are restored.
  2. Run the reboot fast command to restart the system.

More Information

  • After you run the reset saved-configuration command, the next startup configuration file is cleared and the file is not used for next startup. If the current startup configuration file is the same as the next startup configuration file, the current startup configuration file is also cleared.
  • If you do not use the startup saved-configuration command to specify a new configuration file containing correct configurations or do not save the configuration file after running the reset saved-configuration command, the device uses factory configurations for startup. If the device does not have factory configurations, it uses default configurations for startup.

  • If the next startup configuration file is empty, the device displays a message indicating that the file does not exist.
  • Exercise caution when you run the reset saved-configuration command.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 453456

Downloads: 4311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next