No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Do AR Series Routers Support ATM OAM?

Do AR Series Routers Support ATM OAM?

AR series routers support the following operation, administration, and maintenance (OAM) functions: OAMPing, OAM Loopback, OAM CC, alarm indication signal (AIS), and remote defect indication (RDI).

In earlier versions of V200R002C02, the G.SHDSL boards support all the ATM OAM functions. The ADSL and VDSL boards support only the OAMPing function.

In V200R002C02 or later versions, the ADSL, VDSL and G.SHDSL boards support all the ATM OAM functions.

Updated: 2019-08-09

Document ID: EDOC1000079719

Views: 494010

Downloads: 4525

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next