No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Convert RADIUS Attributes After Replacing an ME60 Gateway with an AR Router?

How Do I Convert RADIUS Attributes After Replacing an ME60 Gateway with an AR Router?

After an AR router replaces an ME60 gateway, some RADIUS attributes of the AR router need to be converted into corresponding RADIUS attributes of the ME60 gateway so that the AR router can properly connect to the RADIUS server.

For example, the mapping of Huawei proprietary attributes of the AR router and ME60 gateway is as follows:

  • Proprietary RADIUS attribute 1 (HW-Input-Peak-Information-Rate) of the AR router corresponds to proprietary RADIUS attribute 3 of the ME60 gateway.
  • Proprietary RADIUS attribute 3 (HW-Input-Committed-Burst-Size) of the AR router corresponds to proprietary RADIUS attribute 1 of the ME60 gateway.

According to the preceding mapping, convert proprietary RADIUS attribute 1 to proprietary RADIUS attribute 3, and proprietary RADIUS attribute 3 to proprietary RADIUS attribute 1 on the AR router.

  • Run the radius-server attribute translate command in the RADIUS server template view to enable RADIUS attribute translation.
  • Run the radius-attribute translate HW-Input-Peak-Information-Rate HW-Input-Committed-Burst-Size receive command in the RADIUS server template view to convert proprietary RADIUS attribute 1 in received packets to proprietary RADIUS attribute 3.
  • Run the radius-attribute translate HW-Input-Committed-Burst-Size HW-Input-Peak-Information-Rate receive command in the RADIUS server template view to convert proprietary RADIUS attribute 3 in received packets to proprietary RADIUS attribute 1.

When receiving packets containing proprietary RADIUS attribute 1 or 3 from the RADIUS server, the AR router can properly obtain attribute information.

For the mapping between other attributes, for example, between proprietary RADIUS attribute 4 (HW-Output-Peak-Information-Rate) of the AR router and proprietary RADIUS attribute 6 of the ME60 gateway, you can configure attribute translation similarly. For details about the mapping between attributes, see the RADIUS attribute table for the AR router and that for the ME60 gateway in the corresponding product documentation.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 456656

Downloads: 4321

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next