No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Is the GE Interface on the 8FE1GE Interface Card Not Seen in Interface Information After the Interface Card Register Successfully?

Why Is the GE Interface on the 8FE1GE Interface Card Not Seen in Interface Information After the Interface Card Register Successfully?

Run the display interface brief command to view the interface information:

<Huawei> display interface brief
InUti/OutUti: input utility/output utility
Interface                   PHY      Protocol    InUti    OutUti      inErrors     outErrors
Cellular0/0/0               down      down        0%        0%           0             0    
Cellular0/0/1               down      down        0%        0%           0             0    
Ethernet5/0/0         down      down        0%        0%           0             0    
Ethernet5/0/1         up          up        0%        0%           0             0    
Ethernet5/0/2         down      down        0%        0%           0             0    
Ethernet5/0/3         down      down        0%        0%           0             0    
Ethernet5/0/4         up          up      0.01%     0.01%          0             0    
Ethernet5/0/5         down      down        0%        0%           0             0    
Ethernet5/0/6         down      down        0%        0%           0             0    
Ethernet5/0/7         down      down        0%        0%           0             0    
GigabitEthernet0/0/0        down      down        0%        0%           0             0    
GigabitEthernet0/0/1        down      down        0%        0%           0             0    
GigabitEthernet0/0/2        down      down        0%        0%           0             0    
GigabitEthernet5/0/0  down      down        0%        0%           0             0    

You can see from the command output that the GE interface on the 8FE1GE interface card is displayed after the other GE interfaces on the router, not following the eight FE interfaces on the interface card.

Translation
Download
Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 450521

Downloads: 4307

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next