No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR Router Troubleshooting Guide

This Product Documentation provides guidance for maintaining AR Enterprise Router, covering common information collection and fault diagnostic commands, typical fault troubleshooting guide, and troubleshooting.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Advantages Does RIP-2 Have Compared with RIP-1?

What Advantages Does RIP-2 Have Compared with RIP-1?

  • Routing Information Protocol version 2 (RIP-2) supports the tagging of external routes and uses the routing policy to flexibly control routes based on the tag.

  • RIP-2 packets contain mask information and support route aggregation and Classless Inter-domain Routing (CIDR).

  • RIP-2 supports specifying the next hop so that the optimal next-hop address can be specified on the broadcast network.

  • RIP-2 supports sending update packets for multicast routes. Only devices that support RIP-2 can receive RIP-2 packets. This reduces resource consumption.

  • RIP-2 provides two packet authentication modes, namely, plain text authentication and message digest algorithm 5 (MD5) authentication, to enhance security.

Updated: 2019-05-10

Document ID: EDOC1000079719

Views: 443756

Downloads: 4295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next