Checking Information About a License File
The display license command displays information about the license file activated in the system.
Table 4-1 Description of the display license command outputItem
|
Description
|
|---|
Active License on master board
|
Name and path of the active license file on the MPU.
|
Active license
|
Name and path of the active license file.
|
License state
|
Status of a license file: Normal
This state value indicates that a license file is working properly. If the status of the license file on the live network is not Normal, check the license file.
Trial
A license file enters the Trial state if the ESN does not match the device. A license file in Trial state can be used only for 60 days.
To continue to use a license file after the Trial state, apply for a new license file using the correct ESN.
A temporary license file expires and enters the Trial state.
To continue to use a license file after the Trial state, apply for a new license file and activate it.
A license file is revoked and enters the Trial state.
To continue to use a license file after the Trial state, apply for a new license file based on the revocation code and activate it.
If you replace the master main control board but the new ESN does not match the license file, the license file enters the Trial state.
To continue to use a license file after the Trial state, apply for a new license file matching the new ESN and activate it.
Demo
When you activate a temporary license file, it enters the Demo state. The Demo state exists only for a demo license file used for test and deployment.
A license file in Demo state allows you to use normal functions within a specified period. Before the expiration of the license file in Demo state, replace it with a commercial license file.
Emergency
A license file enters the Emergency state when a disaster occurs (commercial scenario).
In the emergency conditions like earthquake, volcano explosion, and tsunami, you can run the license emergency command to trigger a license file to enter the Emergency state. The Emergency state stays for seven days, and a license file can enter the Emergency state three times.
Default: No license file is activated or a license file expires.
If a license file enters the Default state, services may be interrupted.
If you want to use services after a license file expires or becomes invalid, apply for a new license file and activate it.
|
Revoke ticket
|
License revocation code.
|
Product name
|
Name of the product that runs the license.
|
Product version
|
Product version.
|
License file ESN
|
ESN in the license file.
|
License Serial No
|
Serial number of license file.
|
Creator
|
Creator of the file.
|
Created Time
|
Time when the file was created.
|
Country
|
Country of the authorized customer.
|
Custom
|
Authorized customer.
|
Office
|
Office of the authorized customer.
|
Feature name
|
Feature name.
|
Authorize type
|
Authorization type. - demo: trial authorization.
- comm: commercial authorization.
|
Expired date
|
License expiration date. PERMANENT indicates that the license is permanently valid.
|
Trial days
|
Trial period.
|
Item name
|
Name of a control item.
|
Item type
|
Type of a control item.
|
Control value
|
Authorized count of a control item.
|
Used value
|
Used count of a control item.
|
Item state
|
Status of a control item.
|
Item expired date
|
Expiration date of a control item.
|
Item trial days
|
Trial period of a control item.
|
Description
|
Description of a control item.
|
Checking the SRU License Status
The display license state command displays the license status on the SRU.
Table 4-2 Description of the display license state command outputItem
|
Description
|
|---|
Master board license state
|
Status of the license on the SRU: - Normal: normal license.
- Demo: demonstration license.
- Trial: trial license that has expired but is still valid during the trial period.
- Emergency: emergency license.
- Default: default license.
|
The remain days
|
Number of remaining days of the license.
|
Checking the Usage of Resource Items in the License File
The display license resource usage command displays the usage of the resource items defined in a license file.
Table 4-3 Description of the display license resource usage command outputItem
|
Description
|
|---|
Activated License
|
File name and path of an active license name.
|
FeatureName
|
Name of the feature controlled by the license.
|
ConfigureItemName
|
Name of a control item.
|
ResourceUsage
|
Percentage of used resources.
|
