No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Typical Configuration Examples

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This document provides examples for configuring AR router features in typical usage scenarios.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Outputting Log Information to a Log File

Example for Outputting Log Information to a Log File


This example applies to all versions and AR routers.

Networking Requirements

As shown in Figure 1-13, the router connects to the Internet through Eth1/0/0. There is a reachable router between the router and the Host.

The maintenance personnel want to use the Host to view log files generated by the router so that the maintenance personnel can learn the running status of the router. When the router is faulty, the maintenance personnel can quickly locate the fault.

Figure 1-13  Exporting logs into the log file


  1. Choose System Management > Log Management > Log File.As shown in Figure 1-14.

    Figure 1-14  Log file

  2. Click Refresh.

    Information about log files is displayed in Log File. For details about parameters in Log File, see Table 1-1.

    Table 1-1  Parameter description



    File Name

    Name of the log file.


    Type of the log file.

    Storage Medium

    Directory where the log file is stored.


    Size of the log file, in bytes.


    To download the log file, you can click .

  3. Find the required log file from the log file list, and click mapping the log file. The File Download dialog box is displayed.
  4. Click Save As.
  5. Select the directory for storing the log file and click Save.
Updated: 2019-05-20

Document ID: EDOC1000079722

Views: 51653

Downloads: 7490

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next