No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Typical Configuration Examples

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This document provides examples for configuring AR router features in typical usage scenarios.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restricting Internet Users from Accessing the Web Platform

Restricting Internet Users from Accessing the Web Platform


This example applies to all AR routers of all versions.

Networking Requirements

As shown in Figure 10-21, GE1/0/0 of the router is connected to the PC. The user wants to allow only the PC with IP address to access the web platform, and deny access of other PCs.

Figure 10-21  Network diagram for accessing the web platform


  1. Choose System Management > System Configuration > Service Management, as shown in Figure 10-22.

    Figure 10-22  Service Management page

  2. In Remote Trust Host IP, click Create, as shown in Figure 10-23.

    Figure 10-23  IP address of a new trusted host

  3. Set the parameters in Figure 10-23.
  4. Click OK.
  5. In the Information dialog box that is displayed, click OK.

Configuration Notes


Updated: 2019-05-20

Document ID: EDOC1000079722

Views: 51264

Downloads: 7479

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next